Tags |
|
|
Links |
|
|
Write You - Noise in the Workplace
I can't tell you why these are secrets, but it might be because most people don't appear to know how to do them. At least, they are not doing them now!Allow me to illustrate my credibility on this subject – I am an only parent of two wonderful daughters in middle school (and a dog) and hav
There are three major methods of sound reduction and control.
Masking is the use of sound to cover up the unwanted or annoying noise.
Absorption is the use of sound absorbing or sound energy conversion material to lessen noise.
Deflection is the use of sound reflective material to direct the excessive noise away.
Find out more at: Arizona Acoustic Art http://www.azaar
Precision machining involves producing of metal parts, which are extremely intricate and are mainly made from thin metal sheets. Besides precision metal parts are often custom made for specific purposes. However there are distinct techniques such as chemical etching, metal stamping, and RF shieldi
Machinery, people and the environment all contribute to noise in the workplace.
Machinery, such as copiers, printers, fax machines, fans, air conditioner, computers, phones and many other types of specialized equipment are a source of noise in the workplace.
People, added to the above by talking, typing, moving around and moving things around in doing their work are another cause of noise in the workplace.
The environment also contributes to the noise by reflecting and amplifying noise off of hard surfaces like walls, windows or ceilings. Vehicular traffic noise and other worksites nearby also add to the din.
The Facts:
Machinery noise is low frequency. Low frequency noise can cause reduced efficiency and even make us sick. Over time, it can do damage to internal organs, if the amplitude is high enough. Sometimes, noise problems in air conditioning or air conditioning ductwork can cause the sickness rate to soar.
People noise is usually a higher frequency. Depending on the volume and pitch, this can sometimes be extremely annoying. The louder others get, the louder we get - setting off an out of control spiral of noise.
Add to this the environment - box like walls, ceilings and windows. The sounds just get louder and louder by reflecting off the hard surfaces. This creates more sickness, annoyance and reduced efficiency.
The Solution:
Reduce or eliminate the noise, either at the source or after the fact.
It would be hard to eliminate people and still run a business. Usually, there is little we can do to reduce the noise that machines make.
There are many ways to accomplish noise reduction. The best, or course, is to build the structure with noise reduction in mind. Short of that, we can do a lot to make it better.
Methods:
There are three major methods of sound reduction and control.
Masking is the use of sound to cover up the unwanted or annoying noise.
Absorption is the use of sound absorbing or sound energy conversion material to lessen noise.
Deflection is the use of sound reflective material to direct the excessive noise away.
Find out more at: Arizona Acoustic Art http://www.azaart
Recently, while visiting a friend's office, he began to tell me his business was a mess. It wasn't fun anymore. "The problem with this business," he said, "is that the manager (ME) is the worst person for the job. I have no training in management. My partner just wants to come to work, do his
The Facts:
Machinery noise is low frequency. Low frequency noise can cause reduced efficiency and even make us sick. Over time, it can do damage to internal organs, if the amplitude is high enough. Sometimes, noise problems in air conditioning or air conditioning ductwork can cause the sickness rate to soar.
People noise is usually a higher frequency. Depending on the volume and pitch, this can sometimes be extremely annoying. The louder others get, the louder we get - setting off an out of control spiral of noise.
Add to this the environment - box like walls, ceilings and windows. The sounds just get louder and louder by reflecting off the hard surfaces. This creates more sickness, annoyance and reduced efficiency.
The Solution:
Reduce or eliminate the noise, either at the source or after the fact.
It would be hard to eliminate people and still run a business. Usually, there is little we can do to reduce the noise that machines make.
There are many ways to accomplish noise reduction. The best, or course, is to build the structure with noise reduction in mind. Short of that, we can do a lot to make it better.
Methods:
There are three major methods of sound reduction and control.
Masking is the use of sound to cover up the unwanted or annoying noise.
Absorption is the use of sound absorbing or sound energy conversion material to lessen noise.
Deflection is the use of sound reflective material to direct the excessive noise away.
Find out more at: Arizona Acoustic Art http://www.azaar
A flow meter is necessary for the task at hand. You know that. What you do not know is how to choose the right one for your task. But, there are some very good tools to help you decide. First of all, a flow meter is a device that is used to measure liquid or a gas in linear, nonlinear, mass or
People noise is usually a higher frequency. Depending on the volume and pitch, this can sometimes be extremely annoying. The louder others get, the louder we get - setting off an out of control spiral of noise.
Add to this the environment - box like walls, ceilings and windows. The sounds just get louder and louder by reflecting off the hard surfaces. This creates more sickness, annoyance and reduced efficiency.
The Solution:
Reduce or eliminate the noise, either at the source or after the fact.
It would be hard to eliminate people and still run a business. Usually, there is little we can do to reduce the noise that machines make.
There are many ways to accomplish noise reduction. The best, or course, is to build the structure with noise reduction in mind. Short of that, we can do a lot to make it better.
Methods:
There are three major methods of sound reduction and control.
Masking is the use of sound to cover up the unwanted or annoying noise.
Absorption is the use of sound absorbing or sound energy conversion material to lessen noise.
Deflection is the use of sound reflective material to direct the excessive noise away.
Find out more at: Arizona Acoustic Art http://www.azaar
Ideas are the only assets which have no fixed values. It is
equally well known that ideas are the beginning of all
achievements. Ideas are the foundation of all fortunes, the
starting point of all inventions.This is where it all begins. This stage, as the first, is
the one on which the
The Solution:
Reduce or eliminate the noise, either at the source or after the fact.
It would be hard to eliminate people and still run a business. Usually, there is little we can do to reduce the noise that machines make.
There are many ways to accomplish noise reduction. The best, or course, is to build the structure with noise reduction in mind. Short of that, we can do a lot to make it better.
Methods:
There are three major methods of sound reduction and control.
Masking is the use of sound to cover up the unwanted or annoying noise.
Absorption is the use of sound absorbing or sound energy conversion material to lessen noise.
Deflection is the use of sound reflective material to direct the excessive noise away.
Find out more at: Arizona Acoustic Art http://www.azaar
Several pieces of equipment are used for die cutting. There are three basic types of cutting equipment. The first is a small swing arm ‘clicker’ press that is ideal for embroidery shops. The second is a large ‘traveling head’ press, which is used for multiple cutting and roll cutting. ‘Full head’
There are three major methods of sound reduction and control.
Masking is the use of sound to cover up the unwanted or annoying noise.
Absorption is the use of sound absorbing or sound energy conversion material to lessen noise.
Deflection is the use of sound reflective material to direct the excessive noise away.
Find out more at: Arizona Acoustic Art http://www.azaart.com, Gilbert, Arizona, inquiries@azaart.com
HTTP = HTML link (for blogs, profiles,phorums):
<a href="http://www.writeyou.net/article/4971/writeyou-Noise-in-the-Workplace.html">Noise in the Workplace</a>
BB link (for phorums):
[url=http://www.writeyou.net/article/4971/writeyou-Noise-in-the-Workplace.html]Noise in the Workplace[/url]
Related Articles:
Top Tips to Boost Your Professional Reputation
Productivity on the Job: Phil's New Nailing Gun
Bookmark it:
|